National RF, of California, has introduced a new “semi-kit” receiver: the RF 75-NS-3. Here’s an excerpt from the product description page of the National RF website:

National RF’s 75-NS-3 receiver is a complete super-hetrodyne mini high frequency receiver, designed specifically for the short-wave listener, electronics enthusiast or radio amateur, who wants to use their hands and build a radio. The receiver is offered as a semi-kit in which the electronic assembly is loaded and functionally tested at the National RF facility. The customer must then go to the grocery store (yes…the grocery store!), procure a can of [Spam] lunch meat, eat it or give it to the dog, and then proceed to drill and paint the can, in order for it to become the receiver’s enclosure! […] Detailed drilling instructions and final assembly instructions are provided as part of the kit. All other parts required for completion of the receiver are provided as well. Recognizing that the finished assembly looked somewhat like the fabled Collins receiver of the ‘60s, the 75S-3, (particularly when the can is painted a light gray) National RF engineers dubbed it (with tongue firmly planted in cheek, of course) the 75-NS-3! Although we have had fun packaging this receiver in a lunch meat can, it is nothing to turn your nose at! Its performance and portability will surprise you, and it is an ideal radio to bring with you on any trip!

The receiver architecture is that of a single conversion super-hetrodyne receiver, that is capable of receiving AM, SSB, or CW. The receiver incorporates a dual gate FET as an RF amplifier with manual peaking and gain controls. A ceramic filter is used in the IF section with a front panel switch that controls a broad or narrow IF response. Other front panel controls include audio drive, BFO setting, and a band switch for the HF bands. The 75-NS-3 has internal receive frequency coils that are switched at the front and rear panels. The frequency range of the receiver, over three band set positions, is 3.5 through 12 MHz. This allows reception of several international short-wave bands, the 80, 60, 40, and 30 meter amateur radio bands, and of course, WWV time and frequency standard stations at 5 and 10 MHz.

For those who simply want a lower cost receiver to monitor the shortwave frequencies, National RF offers two variants of the original receiver: the 75-NS-1 and the 75-NS-2. Both are based on the design and circuit of the 75-NS-3, but do not have the band switching and frequency range of the 75-NS-3 receiver. The 75-NS-1 covers between 3 and 6 MHz, including the 80 and 60 meter amateur band. The 75-NS-2 covers between 6 and 12 MHz, including the 40 and 30 meter amateur bands. Both units have the fixed ceramic resonator band width set for about 6 KHz. And, of course, they are both designed to fit in the tasty potted meat can!! All other specifications presented apply to both of these models as well.

Pricing of the 75-NS-x versions:

• Type 75-NS-1 Mini HF Receiver Semi-kit (covers 3 to 6 MHz) $189.95
• Type 75-NS-2 Mini HF Receiver Semi-kit (6 to 12 MHz) $189.95
• Type 75-NS-3 Mini HF Receiver Semi-kit (band switched from 3.5 through 12 MHz in three switched positions) $269.95
• Shipping and Handling to within the US $10.00 each

Click here to view on the National RF website.

SWLing Post reader, Marty (W5MRM), comments:

I recently picked up a Sangean ATS-909X to use as a bedside radio.

This blog post inspired me to put together a video review of the ATS-909X as a bedside radio. The video review can be found on my youtube page [or via the embedded player below]:

Great video, Marty, and thanks for the thorough review!

You can follow all of Marty’s videos on YouTube by visiting this page.

My pal, Jeff McMahon, over at the Herculodge, has just posted a video review of the Sangean PR-D4 portable radio. In summary, he writes:

“It’s a great radio with top FM, AM, and speaker sound. It blows away my C.Crane Radio-2E. Lack of illumination, however, makes it less than ideal as a bedside clock radio.”

Wow! I’m most impressed that Jeff places the PR-D4W (which retails for $69 on Amazon) above the venerable CCRadio-2E (which retails for $169 on Amazon) in terms of AM performance.

I just checked and it appears that Universal Radio also retails the PR-D4W for $69.95.

Follow Jeff at the Herculodge and on YouTube.

Many thanks to SWLing Post reader, Rob Wagner, who writes:

Craig Seager is one of Australia’s finest SWL DXers, a longtime listener with great experience on shortwave, mediumwave and other modes. His amateur radio callsign is VK2HBT. Craig also has another special interest – old radio receivers. He has personally restored many fabulous radios to full working order and has accumulated a fine collection of his own. His knowledge of communications receivers is extensive.

The Mount Evelyn DX Report blog is delighted to welcome Craig who, over the next few months, will regularly contribute a new series called Retro Receiver Reviews – a look at some common and not so common communications receivers from the past. This series will be of interest to both amateur radio operators and shortwave listeners.

Craig’s first review has just been published, covering a radio not often seen these days – the Dansk RX4000 receiver. Check it out at:

http://medxr.blogspot.com.au/2015/09/retro-receiver-dansk-rx-4000.html

Thanks for passing this along, Rob!  That Dansk RX4000 sounds like a robust receiver, with a bullet-proof front end. A nice addition to any collection.

SWLing Post contributor, Dan Robinson, writes:

Wow . . . a huge, amazing rarity…this is perhaps the rarest of radios, the HRO-600.

It is almost never seen on the used market and when it is, it is usually in non-operational condition. In its day it was quite advanced, though now, a Tecsun could run rings around it, and it uses NIXIE tubes…good luck obtaining those…anyway for anyone who has never seen one in this condition, and for everybody, here it is…

Click here to view on eBay.

Wow–I thought that receiver might sit on eBay for a while, but it sold for $3,895 US only moments after Dan spotted it.

Assuming this listing will eventually disappear from eBay, I downloaded a few more photos:

I really enjoy tips like this from Dan.  While rare radios like the HRO 600 are well beyond my budget, it’s so much fun to learn about them. Indeed, I had no idea HRO made a receiver that used Nixie tubes!

What is a Nixie tube you ask? Per Wikipedia:

“A Nixie tube, or cold cathode display, is an electronic device for displaying numerals or other information using glow discharge.

The glass tube contains a wire-mesh anode and multiple cathodes, shaped like numerals or other symbols. Applying power to one cathode surrounds it with an orange glow discharge. The tube is filled with a gas at low pressure, usually mostly neon and often a little mercury or argon, in a Penning mixture.

Although it resembles a vacuum tube in appearance, its operation does not depend on thermionic emission of electrons from a heated cathode. It is therefore called a cold-cathode tube (a form of gas-filled tube), or a variant of neon lamp. Such tubes rarely exceed 40 °C (104 °F) even under the most severe of operating conditions in a room at ambient temperature. Vacuum fluorescent displays from the same era use completely different technology—they have a heated cathode together with a control grid and shaped phosphor anodes; Nixies have no heater or control grid, typically a single anode, and shaped bare metal cathodes.”

As Dan states, Nixie tubes can be very difficult to source these days. I’m sure the radio collector that purchased this HRO 600 is well aware.

Update: While I don’t know what Nixie tubes the HRO-600 takes, Leeds Radio, has a substantial collection of Nixie tubes at reasonable prices. Click here to browse through the collection. Leeds, by the way, is a fantastic resource for pretty much any sort of tube/valve you may need. Check out this piece on Leeds Radio from WNYC.

I hope someone uploads a video of the HRO-600 in operation; I’ve never seen one in action.

Dan, thanks again for sharing your eBay finds!

Many thanks to Jeff McMahon, from the Herculodge, who shares an update to his Sangean PR-D4W review.

The good news is that Jeff continues to be impressed with the PR-D4W and ranks it above the venerable C.Crane CCRadio-2E in almost every category. At $64.50 on Amazon, the PR-D4W is a much better value.

Follow this link to his review:

http://herculodge.typepad.com/herculodge/2015/10/sangean-pr-d4w-review-with-fm-wire-antenna-upgrade.html

Many thanks to SWLing Post reader, Paul Walker, who writes:

Thomas.. I know this isn’t quite SW news anymore, but Radio Kiribati usedto be on SW a while ago and is now on AM.

I just found out something to those of us interested in Pacific radio signals. Radio Kiribati 1440 JUST started a live web stream…JUST…as in, like within the last few days!

The audio levels can be a bit loud and overdriven at times, but i am corresponding with their Chief Engineer and the Radio station manager at the Broadcasting & Publications Authority in an effort to get levels set just right.

The audio is average and I wouldn’t expect much more, quality wise, then what they’ve got now.. as most of these stations have hare basics when it comes to some equipment.
The Radio Kiribati stream was just added to the Reciva.com database for internet radios and should be there soon if it isn’t already.

The stream is at http://202.6.120.13:8000/ The stream itself is of amazing quality at 64k vorbis, which sounds good to my ears via my CC Wifi Radio and CCrane Senta speaker.

Radio Kiribati only broadcasts local programming at certain times of day. Sometimes I’ll hear Radio New Zealand International outside of local broadcasting, other times I won’t.

TX times are as follows…most of their programming is in their native language, which is Gilbertese according to Wikipedia. It’s a Micronesian language of the Austronesian language family. They do three segments of English broadcasting every day, some 30 minutes long and one is an hour long.
Kiribati is UTC+14… at 416pm Thursday in Southwest Arkansas, where i am.. it’s 916am Friday morning in Kiribati.

• Morning: 0700am to 0830am. English at 8am
• Lunch: 1200 noon to 1330. English at 1300
• Evening: 1700 to 2130. English at 1800

Feel free to post this to your own blog, website, Facebook group or page.. let’s spread the word!!

Thanks, Paul!

WiFi radios

Though pricey, I’ve heard the Pure Evoke F4 has fantastic audio and a meticulously curated database of Internet streams.

This is one of the benefits of Wi-Fi radios and Internet streams: the ability to hear “local” stations–many of which used to broadcast on shortwave–from all corners of the globe.

I’m seriously considering purchasing a Wi-Fi radio for my wife to make it a little easier for her to listen to Internet streams in her office.

I’ve been looking at the C.Crane CC WiFi radio, the CC WiFi 2, the Grace Digital WiFi Music Player and the (much pricier) Pure Evoke F4 which my buddy, John Figliozzi, so highly recommends.

Any suggestions and recommendations are most welcome.

The Heathkit Explorer Jr. (Image Source: Heathkit)

Yes, the legendary Heathkit company is back and their first kit is a simple Tuned Radio Frequency (TRF) AM/mediumwave analog receiver: the Explorer Jr.

I knew Heathkit was back in business and under new management, but hadn’t heard any updates as of late. Their president, Andy, just sent a message to the “Heathkit Insiders” group explaining what the team has been up to:

“We’ve designed and developed a wide range of entirely new kit products. We authored the manuals for these kits, complete with the beautiful line art you rely on, preserving and respecting our iconic historic Heathkit style. We developed many new inventions and filed patents on them. We relocated Heathkit, and set up a factory, and a warehouse, and offices, in Santa Cruz, California, near Silicon Valley. We built the back office infrastructure, vendor and supply chain relationships, systems, procedures, operations methods, and well-thought-out corporate structure that a manufacturing company needs to support its customers, to allow us to scale instantly the day we resume major kit sales. All this effort enables us to introduce a fleet of new kits and helps ensure Heathkit can grow, prosper, and continue to bring you great new products for a very long time.”

The Insiders’ message goes into much more detail–I would encourage you to contact Heathkit about joining this group.

The big news in this message was the launch announcement of the Explorer Jr. kit which can be ordered from their website now. The price is $149.95 plus shipping. Heathkit anticipates a 30-day shipping time for the first set of orders.

Here’s a description of the kit from their website:

Many thanks to SWLing Post readers, Mark and Alan, who were both recently notified by C.Crane that the CC Skywave has been updated.

Mike purchased the CC Skywave early this year after reading our review. He was disappointed to find out, though, that a local radio station (in his urban location) overloaded the Skywave’s front end, causing imaging and other problems.

Mike, along with other Skywave owners, notified C.Crane about the issue and returned their units.

C.Crane passed along this feedback to their engineers, who have updated the CC Skywave accordingly.  C.Crane believes the latest production run will be immune to this sort of overloading. [Kudos to C.Crane for listening to customer feedback.]

I contacted C.Crane yesterday–they recommend ordering directly from their website to insure your unit is coming from the latest production run. It’s possible that some of their distributors could still have some of the older units in inventory for the next few weeks. At least, to be certain, you should check with the distributor directly.

To be clear, I’ve never noted the overloading issue on my Skywave, but I live in a rural area with no blowtorch stations nearby. If you live near an AM broadcaster, and are considering the CC Skywave, you should certainly purchase the updated unit.

Click here to view/purchase the CC Skywave on C.Crane’s website.

Again, many thanks to Mike and Alan for the tip!

Though I’ve spent the entire day sawing and splitting firewood, I’ve been actively recording spectrum on the 31, 25, 19 and 16 meter bands with the WinRadio Excalibur, Elad FDM-S2 and the SDRplay RSP. Why? Propagation–especially on the higher bands–has been the best it’s been in several weeks.

As I discovered at the recent SWLing Post DXpedition, my shack PC can handle making multiple spectrum recordings simultaneously as long as I limit each recording to the width of a broadcast band. (I’ve never tried pushing the limit very hard.) Someday in the future–perhaps when we’re having terrible propagation–I’ll play those spectrum recordings back and tune through them as if they were live.

Radio time travel at its best.

When I decided to throw in the towel with all of the firewood processing, I fired up the Sony ICF-SW100 (above) and tuned in a game on 17,855 kHz: Radio Exterior de España.

The REE signal was simply booming into eastern North America!

Hard to break away from the radio on days like this.

My advice? Take advantage of these conditions and make time to listen!

For me, SWLing a great excuse to relax and let me back heal after a long day of splitting wood. For some, perhaps it’s a good excuse to take the radio outdoors and away from urban interference. Whatever the excuse, don’t hesitate to fire up your radio!

There are some interesting stations on the bands this evening. Feel free to comment with some you’ve logged.

I have two of the Sony SRF series pocket AM/FM radios: the grey SRF-59 and the clear SRF-39FP.

The venerable SRF-59 has long been one of the least expensive, quality analog AM/FM receivers on the market. I originally purchased one new for $14.95 US including shipping. Here’s a short review I made of the ’59 several years ago.

The Sony SRF-39FP (click to enlarge)

The SRF-39FP–the model with the clear case–was specifically designed by Sony radio for the prison market.

A couple years ago, someone on eBay had a lot of Sony SRF-39FP units on sale–I jumped at the opportunity to buy one new-in-box for $20 US. The entire lot of SRF-39FPs sold in a matter of hours. Indeed, the ’39FPs were so popular, by the time I prepared a post for the SWLing Post, the seller had already sold out. (I’m kicking myself for not buying at least one extra–!)

While most ultralight radio enthusiasts would give the SRF-39FP a performance edge over the SRF-59, they’re essentially the same radio–especially if you tweak the SRF-59 like my buddy Dave Richards did.

The Sony SRF-59 (click to enlarge)

Several weeks ago, while Steve researched the reason he was hearing shortwave broadcasters on his SRF-59, he also discovered that the SRF-59 had been discontinued and selling in many places for three or four times the original price.

He found one vendor still selling the SRF-59 for $14.99 plus shipping. I placed an order with this vendor over a month ago, but still haven’t received the product because the vendor hasn’t taken delivery of the final batch of units from Sony. I’m in contact with this vendor and when/if the units are received in stock next week, I’ll post an update here on the SWLing Post (if interested, follow this tag).

If you’re in the market for a Sony SRF-59, here are a few places you may find one new or used:

• Amazon
• eBay
• Universal Radio

(If you know of other good suppliers, please comment!)

The SRF-39FP has a clear housing which is meant to prevent prison inmates from using it to smuggle contraband.

If you would prefer the Sony SRF-39FP, the only source I know of is eBay. When one becomes available, it typically sells for $45-50 US.

Click here to search eBay.

To be clear: while the SRF-59 is an exceptional ultralight receiver, $45-50 US would certainly place it in a price class with other excellent ultralights.

Many thanks to former VOA correspondent and noted DXer, Dan Robinson, for the following guest post:

A Late Summer Visit to Howard Mills’ Radio Restoration

-Dan Robinson

The end of summer is a wistful time, as we begin to mourn the passage of warm days and anticipate the arrival of autumn.

For those of us in love with shortwave, even in these waning days of HF broadcasting, August brings changes in propagation that herald the approach of improved reception, thoughts of getting antennas in shape, and preparing receivers for the new DX season.

It’s also a time when Hamfests are winding down for the year — for me, it’s still great fun to attend these and see what equipment is available.

A few months ago, I and fellow Washington, DC area SWL Dave Malick took the opportunity to visit a couple of Hamfests. At one of these, in Berryville, VA, I ran across someone who over the years has become somewhat of a legend in the field of radio restoration — Howard Mills.

Howard lives in rural West Virginia, at a point about equidistant from Harper’s Ferry and Sheperdstown. That’s about an hour or so from DC and the immediate Maryland suburbs. From DC, you drive out Rt 270 to Frederick, Maryland and then up Route 15 and 340.

It’s beautiful country — on the way you pass through small towns, past farms, and in late summer, roadside stands selling huge ears of corn and about every type of vegetable, along with peaches and apples of every type and size.

Back in the late 1990’s I first became aware of Howard Mills when I brought my Collins 51J4 to him for refurbishing.   Howard is one of the few persons remaining in this country capable of going through classic tube receivers from top to bottom.

A visit to Howard is an experience everyone should have at least once in a lifetime. Restoration activities take place in the lower/ground level of his home.

Outside there are some amazing antennas, long wires, and beams which support both his amateur radio and receiver activities.
Under a porch, covered in tarps, are some of his latest equipment and parts acquisitions, from thousands of tubes to some of the rarest radios and transmitter items one may ever see.

Inside, you find a wonderland of receivers. You name it, Howard has it. In racks, there are specialized Beckman 51J4s, SP-600s, AR-88s and R-390/As, Eddystones, and others. In another room, you see some of the most beautiful, and collectible and valuable, American and foreign-made radios dating back to the earliest days.

On tables in one portion of the basement of Howard’s place, you find several R-390s in various stages of refurbishment. One, he notes (probably among his “keepers” ) was found still new in its original crate (how I would love to have that one!).

On the day Dave and I visited, the purpose was to pick up one of the most beautiful R-390s I have ever seen — a Capehart that was refurbished by Howard in 2007 and placed in a custom cabinet, complete with an easy-left-off top, similar to the HQ-180 design. This black beauty is now sitting in my shack at home.

Howard has been at it for many decades, as I said. A conversation with him is a voyage through radio history, punctuated by references to a range of major radio manufacturers. He clearly loves what he does, though one wonders how much longer he will be at it.

Howard emphasizes by the way that his work is in restoring TUBE radios — he doesn’t get into solid state. There are a few well-known receivers in his place — I noticed an ICOM IC-R72 and a JRC NRD-535– but most of what you see are the classics that we have all come to know and love.

His primary specialty appears to be the 51J series. A link to him on the Collins site notes that his main focus is on A line equipment, J series, and 32V series, but he is certainly capable on a number of models, including as I saw, HQ-180s and AR-88s (http://www.collinsradio.org/howard-mills/)

I was able to take some photos of Howard’s operation and offer them to SWLing Post readers here. At this point, Howard remains in business. He has had customers from all over the U.S. and I assume around the globe.

For each refurbishing job, Howard provides an extensive print out of every single modification and component replacement he does, along with the results of sensitivity and calibration tests done for each set.

Please do note that Howard makes clear that basically as long as it takes him to refurbish a radio — is as long as it will take.   If you give him one of your radios, you basically agree to it being with him for several months if not longer. He does have a backlog.

Things like sandblasting front panels for R390s (I am not certain to what extent he does this himself or out-sources this particular aspect) also takes time.   And the detail with which he approaches a breakdown of an R390/A, evidenced by the sets I saw in process, is quite extraordinary and time-consuming.

Howard gets mostly superb reviews from those who have used his services. If you look him up on the Internet, and he has time for you to visit, it’s an experience you will always remember, though it’s not that I would suggest a crowd descend on him.

Hope everyone enjoys the photos — I had intended to get this article to Tom much sooner than October. Keep in mind, of course, that though Howard is one of the last to do this kind of work, there are a few others, including Chuck Rippel in Virginia.

We are indeed lucky to have anyone still doing this work. We know they do it not just as a business, but out of a love for this wonderful old equipment.

Photo gallery

Many thanks, Dan, for taking us on this virtual tour of Howard Mills’ collection and workshop!

Your Capehart R-390A is absolutely gorgeous; Howard, no doubt, brought it back to mint status through loving, considerate restoration. What a great addition to your collection, Dan.

Thank you, again,  for sharing your guest post.

If you’re a subscriber of The Spectrum Monitor (TSM) magazine, you’re in for a treat this month: the November issue is the TSM annual Radio Buyer’s Guide.

Many SWLing Post readers know that I write occasional features and reviews for TSM. Since the November issue will feature my shortwave radio buyer’s guide, I was sent a draft of the November issue. After double-checking my review, I thought I’d glance through some of the other articles–what a rabbit hole that was! Two hours later and I’m still reading. Since I’m primarily a shortwave guy, TSM expands my horizons with articles about parts of the spectrum I seldom explore. That’s a good thing!

TSM Publisher and Managing Editor, Ken Reitz (KS4ZR), has done an amazing job collecting a group of writers who are not only experts in their respective fields, but are effective writers as well. These two qualities do not always go hand-in-hand.

At $3 per issue or (especially) an annual subscription for $24 ($2/issue) I think TSM is a bargain. When the November issue is posted on the TSM website later today, you’ll be able to read through the table of contents online.

It’s hard to believe TSM is almost in its third year of publication–this TSM writer is wishing it many, many more!

The Avion portable DRM receiver is now available on Amazon India (click here to view). It’s being sold for 14,999.00 INR (roughly $230 US).

At time of posting, The Avion DRM receiver only has one review by someone who has (obviously) never used the radio. They give one star then state: “price is very high. so i hate this product.”

While I dismiss reviews like this, I must believe that this price is, indeed, high for most Indian consumers; especially when compared with alternate forms of media consumption (smart phones, analog radio, FTA satellite TV, etc.). It would be high for me, too.

I hope, at least, that the Avion performs well. I have no plans to review the Avion DRM receiver at this point simply because it’s challenging for me to find and decode DRM here in North America with my SDRs hooked up to large external antennas. Don’t get me wrong–occasionally, I do get amazing copy–but it’s typically when conditions are favorable. Listeners in Europe, Asia, and Oceana would have better results, no doubt.

Has anyone seen an objective review of the Avion DRM receiver? Please comment.

Click here to view the new Avion DRM receiver on Amazon.in.

Vimal’s favorite radios are the Tecsun PL-390 and the Eton E100. (Photo: Vimal)

Please join me in congratulating SWLing Post reader, Vimal, for winning our October Shack Photo contest!

Vimal notes:

“I love these radios (see photo above). The Tecsun PL-390 stereo DSP radio with selectable band width- is able to pull in a slew of shortwave stations in quite clearly (of course a lot depended upon time of day and atmospheric conditions.) I can routinely receive signals from Asia, Australia, South America and Europe which is exciting!

And another one is my small Eton E100 Radio- The highlights of this one is that the stereo through headphones sounds great. Its Informative LCD display includes the frequency and the time while the radio is on (some other radios require a keypress to display the clock). It also features a nice amber backlight for the LCD display. Not to forget the sturdy whip antenna.”

Congratulations, Vimal–and many thanks to everyone who shared their photos.

Vimal’s entry was chosen at random from the 62 SWLs and ham radio operators who shared their shack/listening post photos. What an amazing number of entries!

I plan to take the many photos and notes we received from readers and turn them into an online photo galley. I’ll post this as soon as I’ve curated and formatted entries.

If you didn’t win this contest, fear not! We’re already plotting another simple & fun contest before the end of the year.

Reader Challenge

Note, too, that we are still collecting entries for the latest reader challenge: Emergency radio and a chance to win a prepper radio package!

[Click here to read our update to this post.]

SWLing Post reader, Dan, recently sent me this link to the Degen DE1103 on AliBexxpress: http://m.aliexpress.com/item/32521065066.html

The vendor notes a “USA DSP chip” in this unit.

The Degen DE1103 has been around for many years; a testament to its popularity. I’m pretty sure it never had DSP receiver components, though.

I told Dan that this was most likely an error of the Aliexpress web marketing person.

Today, Dan sent me another link, this time to an eBay listing with the title:

“DEGEN DE1103 DSP FM/LW/SW/MW Stereo Dual Conversion Digital World Band Radio”

I took a close look at the photos and noticed that “DSP” is featured on one of the front panel stickers.

Could it be that the DE1103 has been re-designed with a DSP chip? Can anyone confirm?

After publishing our previous post about a potentially redesigned Degen DE1103 with DSP, SWLing Post reader, Tudor, comments:

Yes, the DE1103 looks like it’s been redesigned. You can see it dissected here:
http://bbs.tecsun.com.cn/0002.asp?open=724665

Photo source: http://bbs.tecsun.com.cn/ via Tudor. Click to enlarge.

And, if I’m not mistaken, the SiLabs DSP chip can be seen in this picture:
https://dl.dropboxusercontent.com/u/5417175/2015102316185240911.jpg

Photo source: http://bbs.tecsun.com.cn/ via Tudor. Click to enlarge.

Wow–thanks so much for confirming this, Tudor! This is obviously a redesigned Degen DE1103. I also noticed “NEW-DE1103-MAIN-1.2” silk-screened on the board:

Photo source: http://bbs.tecsun.com.cn/ via Tudor. Click to enlarge.

The Hong Kong-based eBay vendor Bigbargainsonline is selling the new Degen DE1103 for $79.00 US shipped. I’ve purchased from them several times before and was pleased with the experience.

There are other vendors selling the new Degen DE1103 as well (click here to search eBay) but make sure you’re purchasing the 2015 version of the Degen DE1103 since you can still find the cosmetically-identical legacy DE1103 new in box.

Tudor, thanks again for sharing a link to the discussion on tecsun.com.cn–while I can’t read Chinese (and the Google translation leaves something to be desired!) the photos certainly tell the story.

It doesn’t matter that propagation is rather poor this morning: I have a Sony ICF-SW100, a good cup of coffee, a beautiful sunrise and Radio Australia is loud and clear on 9,580 kHz.

All is well.

Many thanks to SWLing Post reader, Eric Weatherall, who writes:

I’ve been interested by news of the updated DSP version of the Degen DE1103.

I just saw an eBay auction for a used DE1103 which listed “DSP” in the title. But I looked at a photo of the product and it showed the labeling of the original product. If you look at the bottom left of the unit, the older radios have two lines of product description printed in black, and the newer radios have one line.

Based on photos I found online, here is the old product’s description (which applies to both the Degen and Kaito versions)

“PLL FM STEREO/SW MW LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER”

And here is the new product’s description.

“FM STEREO/SW MW LW DIGITAL WORLD RECEIVER”

I thought this would be useful for anyone wishing to buy the new DSP version of this radio where a photo of the actual unit is shown.

Eric has a good point–many times on eBay, sellers simply copy descriptions from previous or existing listings. You my find a used DE1103 listed as a unit with DSP. It’s best to confirm the version with the seller before purchasing. To my knowledge, only the 2015 version of the Degen DE1103 has DSP.

Check this out: a tutorial on decoding ATSC HDTV via the SDRPlay RSP software defined receiver.

(Source: coolsdrstuff.blogspot.com)

One of the main reasons I got the SDRPlay RSP was its wide bandwidth. It can show up to 8 MHz of spectrum at once. I figured it should be able to watch TV. Turns out it can, but it’s only designed to receive DVB-T.

Unfortunately, they only use that in Europe and a few other places. In North America we use ATSC.

In this article I will show how to use it to watch ATSC.

Click here to read the full tutorial…

This is one of the things I love about SDRs: in many ways, their applications are only limited by your imagination.

Click here to read our review of the SDRplay RSP.